| 品牌 |
LHT |
型号 |
光纤收发器单模单纤 |
| 接口类型 |
SC |
线缆类型 |
sx |
| 传输距离 |
80以上（m） |
传输方式 |
sc |
| 发射波长 |
1310（nm） |
发射功率 |
1300（dbm） |
| 电压输入 |
5（V） |
| |
100M fiber media converterFeatures:Supporting :Full duplex and half –duplex transmission and capable of automatic negotiation. efficient built-inswitching core ,to implement flow control and reduce broadcast packets.Supporting :The transmission of extra-long packets overVLAN Supporting :The selection of multiple types of fiber ports such as dual-fiber multi-mode .dual-fiber single –mode and single –fiber single –mode, to satisfy the extended requirements of users.Parameter:
| Parameters | Specifications |
| Access mode | 10/100/1000Mbps Gigabit Ethernet |
| Standard | IEEE802.3 10Base-T Ethernet,IEEE802.3u 100Base-TX/FX Fast Ethernet, IEEE802.3ab 1000Base-T , IEEE802.3z 1000Base-SX/LX Gigabit thernet,IEEE802.1qVLAN,IEEE802.1p QoS,IEEE802.1d Spanning Tree |
| Wavelength | 850nm/1310nm/1550nm |
| Transmission distance | Dual-fiber multi-mode: 220m (fiber size: 62.5/125µm)/550m(fiber size: 50/125µm)Dual-fiber single-mode: 10/20/40/60/80/100/120KmSingle-fiber single-mode: 10/20/40/60/80KmCategory-5 twisted pairs: 100m |
| Port | One RJ45 port: Connected to STP/UTP category-5 twisted pairsOne fiber port: dual-fiber multi-mode – SC (fiber size: 50,62.5/125µm) Dual-fiber single-mode – SC/FC fiber port (fiber size: 9/125µm)Single-fiber single-mode – SC/FC fiber port (fiber size: 9/125µm) |
| Conversion mode | Medium conversion |
| Delay | <10µs |
| Bit error rate | <1/1000000000 |
| MTBF | 100,000 hours |
| LED | POWER (power), FX LINK (fiber link action), TP LINK1000 (twisted pair connection 1000M), TP LINK100 (twisted pair connection 100M), TP ACT (twisted pair packet forwarding action) |
| Power | AC220 0.5A/DC-48 (builtin) |
| Power consumption | internal power supply or external power supply: AC100 ～ 265V / DC5V |
| Operating temperature | -10~55℃ |
| Operating humidity | 5%~90% |
| Storage temperature | -40~70℃ |
| Storage humidity | 5%~90% (non-condensing) |
| Dimensions | 26mm(H)*70mm(W)*98mm(D) (height*width*depth) (builtin power)120mm(H)*24mm(W)*78mm(D) (depth*width*height) (module card) |
Ordering choice:
| model | Description | note |
| WN-MC-100-SSC-10 | 10 km，single-mode duplex，pure 100M，SC connector | Desk top type & card type |
| WN-MC-100-SSC-25 | 25 km，single-mode duplex，pure 100M，SC connector | Desk top type & card type |
| WN-MC-100-SSC-40 | 40 km，single-mode duplex，pure 100M，SC connector | Desk top type & card type |
| WN-MC-100-SSC-60 | 60 km，single-mode duplex，pure 100M，SC connector | Desk top type & card type |
| WN-MC-100-SSC-80 | 80 km，single-mode duplex，pure 100M，SC connector | Desk top type & card type |
| WN-MC-100-SSC-100 | 100 km，single-mode duplex，pure 100M，SC connector | Desk top type & card type |
| WN-MC-100-SSC-120 | 120 km，single-mode duplex， pure 100M，SC | Desk top type & card type |
产品特性兼容IEEE 802.310Base-T、IEEE 802.3u100Base-TX/FX以太网标准提供一个SC单模光纤接口和一个10/100M RJ45端口, 支持速率和全/半双工模式自动协商支持端口自动翻转功能（Auto MDI/MDIX），即插即用动态LED指示灯，实时显示设备当前工作状态，提供简单的工作状态提示及故障排除采用符合IEEE 802.3x标准的全双工流量控制，符合Backpressure标准的半双工流量控制外置电源，桌面精巧型钢壳结构设计技术参数
| u骨干特征 |
| 符合 | IEEE802.3 10Base-T标准 |
| 符合 | IEEE802.3u 10/100Base-TX/FX标准 |
| 符合 | IEEE802.3X标准 |
| u端口传输速率 |
| 光口 | 1.25Gbps |
| 电口 | 100Mbps |
| u双工支持 |
| lHSGQ系列光纤收发器支持全/半双工自动协商功能 |
| l10/100M自适应 |
| l整机发热小，性能稳定可靠，即插即用，可机架安装 |
| l完备的LED状态指示，便于网络诊断和故障检查 |
| l全双工流量和半双工背压流量控制，自动复位功能，防止死机现象 |
| u网络线缆 |
| l10/100Base-TX UPT 5类线 |
| l100Base-FX |
| l单模光纤：9/125µm |
| u传输距离 |
| 10/100Base-TX | 100m |
| 100Base-FX | |
| 单模光纤 | 20/40/60/80/100/120Km |
| uLED显示 |
| PWR | 电源状态 |
| TX | 电口接收数据 |
| FXLINK | 光口连接状态 |
| RX | 光口传送数据 |
| u接口类型 |
| l2个RJ45 10/100Base-TX端口 |
| l1个SC/ST多模/单模接连器 |
| u环境参数 |
| 工作温度 | 0℃~+56℃ |
| 储存温度 | -40℃~+86℃ |
| 相对湿度 | 5%~90% |
| u其他参数 |
| 电源外置 | 160mm×110mm×30mm |
| 额定供电电压 | AC220V/50Hz |
| 外置电源 | DC 5V/1A |
| 功率 | ≦5W |
点击图片查看原图