| 品牌 |
OEM中性 |
型号 |
KYS-0411 |
| 产品类型 |
电缆验测仪 |
功能 |
多功能网络测线仪 |
| OEM |
可OEM |
质保 |
一年 |
QQ在线：805111762订购热线：13682300158黄小姐电子邮箱：13682300158@163.comMSN:h13682300158@hotmail.com到我网站看更多精美商品请点击：http://xinrunke.cn.alibaba.com工厂地址：深圳市宝安区龙华民治街道上塘工业区九栋专业研发、生产、销售，KVM/USB手动和自动切换器,VGA分配器，MHLMicroUSB转HDMI线,Adapter,DP(Display Port)转VGA/DVI/HDMI转接线/头,HDMI分配器，HDMI切换器，承接各种电脑周边线材类等,承接OEM订单,质量稳定,价格实惠,欢迎采购!LAN/USB多功能线材测试仪型号：KYS0411警告电缆不可在已通电的状态下测试说明：这个网络线材测试仪是设计成容易读看，正确线材接点状态。可测线材包括：USB（A/A）.USB(A/B).10Base-t,100Base/Tx,1000Base/Tx,Base/Tx,Token,Ring.AT&T258A,EIA/TIA,568A/568B,同轴电缆，BNC，RCA和RJ11/RJ12电话水晶头连接线，如果你要从配线架上到墙上面板的长距离测试线材时，可用移动终端盒（Remote Terminator)如果你要测试网线/USB线，可将线材直接插上测试仪上的正确孔位，就可经正确且方便地测试，如果你要测试RJ11/RJ12电话水晶头连接线时，可以将所附的小塑料套套上RJ45母座上，这样可以进行方便又正确的测试，至于其他没有专用测试孔的线材如BNC，同轴线，RCA连接线，则需另行购买转换线或转换头来以方便使用。操作方式：1.使用测试仪主体,被测线材一头(RJ45/USB)插入标示为发射口(TX),另一头插入标示为接收口(RX)或插入移动终端盒的RJ45/USB口.2.打开电源开关拔到“TEST”段是一步一步的测试方式。LED灯会亮在被测线的第一个连接点，每按一次测试键,LED灯会亮在被测试的下一个连接点,依次往下,周而复始.电源开关拔到“AUTO”段是自动扫描模式，LED灯会自动从第一点依序亮到第八点和接地点，周而复始。3.从LED灯的显示，可以看出被测试的结果是否正确，如果LED灯显示不正确，被测试可能是短路、开路、反接、跳动接等情形。移动终端盒使用方式：1.将被测试线的一头号插入测试仪主体的发射孔（TX），另一头插入接收的移动终端盒的接头。打开电源开关到自动模式（AUTO）。如果被测试是在面板或配线架上，则使用辅助线来连接。2.移动终端盒上的LED灯与测试仪主体的LED灯会同时显示出被测线的接点情形。LAN/USBMulti-Modular cable TesterWaring: Please don’t use in live circuits.LAN/USBMulti-Modular Cable Tester User ManualIntroductiom:The LAN/USB Cable Tester is designed to easily read the correct cable pin out configuration. The cables include of the USB(A/A).USB(A/B).BNC 10Base-T100Base-Tx,1000Base-Tx,Token Ring,AT&T 258A,Coxial, EIA/TIA568A/568B andRJ11/RJ12 modular cables,You can use connect cable if you,want to test BNC,Coaxial, RCA modular cables if you want to test cable installed far away either on patch panel or wall pate which can use the Remote terminator. The LAN/USB Cable Tester tests RJ11/RJ12 cable ,please use the appropriate adapors and follow the above procedure so you can use it very easy and corect.Operation:
Usting the master tester.plug one end of the tested cable (RJ45/USB)to the marked with “TX” and another end of tested cable to the marked with “RX” or Remote terminaor RJ45/USB connector.Tum the power switch to “TEST”. In the step by step mode, the LEDfor pin lwith light up. With each press of the “TEST” button,the LED will scroll in sequence in the “AUTO”scan mode.the upper row of LEDs will begin to scroll in sequence from pin 1 to pin8 and ground.Reading the result of LED display .it tells you the correct status of the tested cable if you read out the incorrect of LED display. The tested cable with the
short.open..reversed .miswired and crossed.Note:if the Battery Low power.the LEDs will be dimmed or holp up or no light and the test result will be incorrect.Remot:
Using the master tester. Plug one end of tested cable to the marked with “TX” jack and another end on the receiving of Remote terminator. Turn the power switch to Auto mode and use the adaptor cable if the cable terminates into a pateh panel or wall plate.The LED on the Remote terminator will begin to scroll in relation to the master tester indicating the cable’s pin out.
型号：KYS-0411保修期：一年SIZE：134（L）x 68（W）x 30（H）OEM:可以供应商类型:自主生产厂商
点击图片查看原图