价格:0.00/台
品牌:NET LINK
起订:1000台
发货:1天内
| 品牌 |
NET LINK |
型号 |
10/100M外置电源光纤收发器 |
| 接口类型 |
SC |
线缆类型 |
SX |
| 传输距离 |
20（m） |
传输方式 |
SC |
| 发射波长 |
1310（nm） |
发射功率 |
1300（dbm） |
| 电压输入 |
5（V） |
| |
Intelligent Fast Ethernet Media Converter SeriesOverviewDue to its unique function of link failure alert between electrical port and optical one, the intelligent 10/100M adaptive fast Ethernet media converter can replace the media converter with network management to greatly reduce the system cost.NT-1100 Ethernet media converter can interconvert electrical signals of 10Base-T and 100Base–TX twisted pairs with optical signals of 100Base-FX. It extends the network transmission distance from 100m via copper cables to 120 km via fiber optical cable. It enables the data to transmit in two different mediums of electrical and optical networks either by the technology of data link L2 store-and-forward, or by the one of PHY L1 cut-through). It supports transmission in multi-mode dual fiber, single mode dual fiber and single mode single fiber.Features10/100Mbps auto-sensed, facilitating network upgradeBuilt-in efficient switching core to implement flow control and reduce broadcast packetsfull-duplex and half-duplex auto-sensedSupporting automatic cross connection of twisted pair interfaces, facilitating system commissioning and installationSupporting Link Failure Alert (LFA)Supporting half /full-duplex of FX and link failure alert with optional dip-switchSupporting 10/100Mbps store-and-forward and 100Mbps cut-through transmission with optional dip-switch(unique)Supporting low-timelag transmissionSupporting the transmission of extra-long packets up to1600 bytesSupporting the transmission of extra-long VLAN packetsSupporting Quality of Service (QoS) , ensuring the transmission of VoIP packetsSupporting STP to form a redundant networkExtremely low power consumption (less than 2W), low heat, reliable and stable performance, and long lifetime;Options in single mode dual fiber, multi-mode dual f fiber, and single mode in single fiberApplication10/100Mbps fast optical Ethernet long-distance transmitting networkTechnical Indexes
| Parameter | Specifications |
| Access mode | 10/100Mbps |
| Standard | IEEE802.3 10Base-T Ethernet, IEEE802.3u,100Base-TX/FX Fast Ethernet, IEEE802.3x Flow control,IEEE802.1q VLAN,IEEE802.1p QoS,IEEE802.1d Spanning Tree |
| Wavelength | 850nm/1310nm/1550nm |
| Transmission distance | Dual-fiber multi-mode: 2 km;Dual-fiber single mode: 20/40/60/80/100/120 km;Single fiber single mode: 20/40/60/80/100 kmCategory-5 twisted pairs: 100m |
| Port | One RJ45 port: For connecting STP/UTP category-5 twisted pairsOne optical port: Multi-mode, dual fiber: SC or ST (50, 62.5/125μm)Single mode, dual fiber: SC or FC (9/125μm)Single mode Single fiber: SC or FC (9/125μm) |
| Conversion means | Media conversion, store-and-forward/cut-through |
| MAC address table | 1K |
| Buffer space | 1Mbit |
| Flow control | Full duplex: flow control;Half duplex: back pressure |
| Delay | Store-and-forward: 9.6μs; cut-through: 0.9μs |
| BER | <19-9 |
| MTBF | 100,000 hours |
| LED indicator | POER (power supply); FX LINK/ACT (optical link/action)FDX (FX full duplex), TP LINK/ACT (twisted pairs link/action)TP 100 (100M transmission rate of twisted pairs),FX 100 (100M transmission rate of optical fiber) |
| Power supply | DC5V 1A (external), AC220 0.5A/DC-48 (internal) |
| Power consumption | <2W |
| Operating temperature | -10~55ºC |
| Operating humidity | 5%~90% |
| Maintaining temperature | -40~70ºC |
| Maintaining humidity | 5% ~ 90% non-condensing |
| Dimensions | 140 mm (W) * 110 mm (D) * 40 mm (H) (internal power supply)71mm (W) * 94mm (D) * 26 mm (H) (external power supply)25 mm (W) * 152 mm (D) * 128 mm (H) (card type) |
Order Information
