| 品牌 |
REBO |
型号 |
REBO-100M-POE |
| 接口类型 |
SC,FC,ST |
线缆类型 |
SM.MM |
| 传输距离 |
80以上（km） |
传输方式 |
光纤 |
| 发射波长 |
1310（nm） |
发射功率 |
3~-8（dbm） |
| 电压输入 |
24V/56V/48（V） |
尺寸 |
110X40X140（mm） |
10/100/1000Base-TX UTP to 1000Base-FX fiber media convertion.IEEE802.3af PoE PSE compatible.9K bytes packet at cut-through modeBuilt-in AC/DC power supply.Over-current protection.choice of SC, BiDi or other connectors for multimode and singlemode.DIP switch to set different configurations.LFP (Link Fault Pass-through) supportREBO-110 series is a 10/100/1000Base-TX to 1000Base-FX (also can be forced to 100Base-FX) media converter, which allows two types of network segment to be connected easily. Complied with IEEE802.3af standard, the AC/DC powered PoE media converter is a Power Sourcing Equipment (PSE) which combines data transfered over a fiber optic link with 48V (or other voltage) power supply, providing power to IEEE802.3af powered device (PD) over CAT5 UTP cable (cable length up to 100meters / 330feets). The converter includes a single port PSE controller, which offers PD signature sensing and power monitoring features. Other features include over-current protection, LFP function. The LFP (Link Fauit Pass-through) allows the media converter to monitor both the fiber and copper RX port for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault.Technical Specifications:Data Rates:- 10/100/1000Mbps (IEEE802.3U IEEE802.3z 1000Base-Tx)- 1000Mbps (1000Base-FX) or 100Mbps (100Base-FX)Input Power Requirements:- Input voltage ........................... 100 VAC to 240 VAC- Input frequency ................................. 47 Hz to 63 HzPower over Ethernet Output:- Pin Assignment and Polarity……1/2 (V+),3/6 (V-) or/and 4/5(V+),7/8 (V-)- Output Power…..please refer to ordering information- Efficiency ....................................................75% min- Short circuit protection........................ auto recovery- Over current protection ....................... auto recoverynvironmental Conditions:- Operating temperature ....................... 0?? to 50??- Cooling ........................................ free air convection- Storage temperature ...................... -20?? to +85??- Operating Humidity …… 90% max, non-condensingMechanical Specifications:- Case Material……………Iron- Case Color………………………………….Black- Net Weight…………………….550g approx. / unit- Dimensions………110(W) x 40(H) x 140(L) (mm) Do not include transceiver lengthConnectors:- AC Inlet…………IEC-J-4- LAN………………Shielded RJ-45- Fiber………………see ordering informationOrdering Information:
| Part Number | Supported Standard | Output Voltage | Output Current | Output Power | Remark |
| REBO-110S-XX-XXX | IEEE 802.3af | 48V | 0.35A max | 15.4W max | default |
| REBO-110-XX-XXX | IEEE 802.3af | 48V | 0.54A max | 25W max | default |
| REBO-110A -XX-XXX | IEEE 802.3af | 56V | 0.54A max | 30W max | optional |
| REBO-110B-XX-XXX | Non-standard | 48V | 0.60A max | 30W max | optional |
| REBO-110C -XX-XXX | Non-standard | 24V | 1.20A max | 30W max | optional |
*XX-XXX: supports optic connector / fiber type and distance. For more details, please refer to the list below or contact us.
| Suffix | Description | Suffix | Description |
| SC-M005 | SC, Multi-Mode, 550m , 850nm | BS3-S10 | BiDi SC , Single-Mode, 10km , 1310/1550nm |
| SC-S10 | SC, Single-Mode, 10km , 1310nm | BS3-S20 | BiDi SC , Single-Mode, 20km , 1310/1550nm |
| SC-S20 | SC, Single-Mode, 20km , 1310nm | BS3-S40 | BiDi SC , Single-Mode, 40km , 1310/1550nm |
| SC-S40 | SC, Single-Mode, 40km , 1310nm | BS5-S10 | BiDi SC , Single-Mode, 10km , 1550/1310nm |
| SC-S60 | SC, Single-Mode, 60km , 1550nm | BS5-S20 | BiDi SC , Single-Mode, 20km , 1550/1310nm |
| | BS5-S40 | BiDi SC , Single-Mode, 40km , 1550/1310nm |
欢迎到
点击图片查看原图
